A Professional Carpenter Finally Reveals His Over 9000 Furniture & Craft Plans Previously Only Available To Top Industry Woodworking Shop Designers!

You'll Get Instant Access To Over 9000 Woodworking Plans For DIY Furniture & Crafts !

Join the thousands of DIY Woodworking Crafters that love Furniture Craft Plans!

>>> Get The Furniture Craft Plan Bundle! <<<

FOLLOW ME ON INSTAGRAM: @modustrialmaker //

This video shows how to make a DIY concrete coffee table top look like marble. The top is made using Fishstone’s glass fiber reinforced concrete (GFRC) ready-made concrete mix, which is pre-cast in a melamine form. I separated out batches of different colored concrete (from white to dark grey), mixed them together in the form, and then swirled them together by hand to get the marble-like appearance.

I also use an ancient Japanese technique called “Shou Sugi Ban” to make the base for the coffee table. I used a modernized version of shou sugi ban, employing a propane torch to char the outside of the wood. The charred wood is natural way of protecting the rest of the wood, and when finished with a penetrating oil, such as Danish oil, provides a durable surface. This technique works well on any open-grained wood, such as Douglas fir, pine, and cedar. I used inexpensive 4×4 Douglas fir lumber from my local big box store.

— SUPPORT THE CHANNEL —
Buy Modustrial Maker MERCH (Shirts, etc.):

CONCRETE (GFRC) PRODUCTS USED:

• Two bags of Pre-Blended GFRC Mix:
• 1.5 Bag of AR Glass Fibers:
• Cake Fondant Tool for perfect edges:
• Concrete mixer (HUGE help for GFRC):
• StoneTech concrete sealer:
• Another concrete sealer I like:
• Black 100% Silicone Caulk:
• Paste Finishing Wax:
• Concrete Pigment:

WOOD

– Three (3) 8 ft. 4x4s — Douglas Fir, Cedar, or Pine
– 3/4″ Dowels:

OTHER PRODUCTS USED IN VIDEO:

– Propane Torch:
– Danish Oil:
– RZ dust mask:
– Diamond Grinding Wheel (for grinding underside of table):
– Forstner Bit Set:
– Tack Life Level:
– Kreg Pocket Hole Jig:
– Herzo Dust Shround for Angle Grinder:

TOOLS I USE:

– Tack Life Angle Grinder:
– Bosch 18V cordless circular saw:
– Bosch 18V cordless Drill & Impact Driver Kit:
– Dewalt Table Saw w/ 32” Rip Capacity:
– Japanese Flush Cut Hand Saw:
– Dewalt 12” Miter Saw:

#concrete
#gfrc
#coffeetable
#concretecoffeetable
#concretecountertop
#concretecountertops
#diyconcrete
#woodworking
#shousugiban
#table
#diy
#howtomake
#moderncoffeetable
#modernfurniture
#diycoffeetable

source

Pin It on Pinterest

Shares
Share This

Share This

Share this post with your friends!